INSTRUCTIONS

LC BRACKETS

LC Bracket instructions half page hi res.jpg

LC Bracket instructions

  1. Apply a bead of silicone caulk to the top of the sink rim.

  2. Place the sink into position and hold it in place using tape or a bar clamp. Clean off excess caulk. 

  3. Bend the LC Bracket at the notches to allow for flat placement of the lower segment against the cabinet's side wall. 

  4. Position each LC Bracket into your desired location, making sure to apply upward pressure between the bracket and the sink. 

  5. Pre-drill and install the provided mounting screws. 

  6. Adjust the locking screw to ensure the sink is snug with the countertop. Be careful not to lift the countertop. 

  7. Smooth and clean excess caulk. 

LC0915 - Low Clearance Brackets.jpg
Granite Texture

Watch a quick demonstration video below